Z7105 ZTechnik Engine Guards for R1150GS/R/RS/RT
ZTechnik’s stainless steel , matte silver finished engine guards . They are carefully designed to allow clearance for oil changes or valve cover access, so they never need to be removed. Guards attach to the engine mounts – not the engine covers – to protect the engine heads and not destroy them. Integrated top brackets on each guard allow the rider to mount accessory lights, video cameras, or whatever they can imagine!
Stainless Steel / Beadblasted Satin Finish
$335
Z1210 ZTechnik Rear Seat Storage Pod
The roomy 4-liter Storage Pod™ offers a stylish and practical way to carry the essentials. Removeable inner tray features three zippered storage pockets and a zippered document holder. Web straps and vinyl coated hooks allow universal mounting on almost any bike.
Durable canvas over a thermo-molded pod.
H: 4.5-6.0 in.
W: 9.0-12.5 in.
L: 13.75 in.
$159
Z5505 ZTechnik Rego Plate Helmet Lock
Finding a convenient place to store your helmet can be a problem with some bikes. That's why we developed this system to be placed in a very accessible location. When mounted, the frame will hold and lock two helmets using a push-lock locking mechanism that comes with 4 matching keys. **Please Note** Because the state of Wisconsin does not comply with SAE license plate standards, fitment of Wisconsin plates to the Z5505A is marginal. Wisconsin plates may be mounted, however only the top two holes may be used for mounting these plates to the Z5505A.
H: 6.5 in. W: 6.75 in. (see the dedicated Z5505 page for more details)
Black gloss epoxy powdercoated steel
$75
Z6140 ZTechnik Accessory Mount; Fork Cap Mount
This Fork Cap Mount replaces the fork tube oil filler bolt found on many BMW motorcycles. As with all ball/socket systems, the shaft can be rotated to almost any angle and the top plate can be rotated 360 degrees as well as off-set left, right and center.
$99
Z6021 ZTechnik Engine Guard Light Mount; ( Set of 2 ) Anodized Silver
Mounts to any tubular bar from 7/8 in.(22mm), 1 1/8 in.(28mm) to 1.25 in.(32mm) using supplied adaptors. Provides mount for lights with 10mm post.
$36
Z6030 ZTechnik Quick Change Adapter Plate
The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.
Platform: 3.125 in. x 2.50 in.
$19
Z6032 ZTechnik Accessory Mount; Garmin Zumo 660/665 Top Plate
The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.
Platform: 3.125 in. x 2.50 in.
$13
Z6050 ZTechnik Accessory Mount; 3.0 in. (76mm) Extension Shaft
The 3.0 in. Extension Shaft provides additional mounting flexibility. Positions your devices within easier reach, or clears your tank bag or gauges.
$13
Z6057 GPS Holder
Adjustable Cradle for GPS units with flat back panels. Adjusts to accommodate GPS Units from 2.5 to 3.5 in. tall, 5.0 in. wide and 1.25 in. thick. Mounts to any current ZTechnik Accessory Mount with included hardware.
$29
Z6208 Small Cell Phone/MP3 Holder
Adjustable cradle for mounting small cell phone or I-Pod® ( Nano, Mini or standard). This kit may be mounted directly to any standard top plate or to the Z6202 Quick Change Adapter.
Holds accessories from 40mm to 73mm. Overall height is 89mm
$29
Z6200 (black) / Z6500 (silver) Wide Accessory Top
The Z6200 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.
$18
Z6042 (black) / Z6041 (silver) Small GPS/XM Accessory Top Plate
Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit.
$18
Z6400 Single Pin Accessory Adaptor
For mounting GPS or satellite radio cradles with a single square pin onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter.
$5
Z6401 Four-Pin Accessory Adaptor
For mounting GPS or Satellite radio cradles with four square holes onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter.
$5
Z6061 ZTechnik Accessory Mount; Adapter; 4-Hole AMPS pattern to Dual-T Pins
Converts 4-Hole AMPS pattern on ZTechnik Accessory Mount Top Plates to Dual-T pins. Allows Dual-T mounting accessories to be mounted onto ZTechnik top plates.
$5
Z6062 ZTechnik Accessory Mount; Cradle for iPhone (with Z6061 Adapter above)
Securely Holds your iPhone® 3G or 3GS or Motorola® Droid®. Mounts with included hardware to any ZTechnik Accessory Mount.
Z6063 ZTechnik Accessory Mount; Cradle for Blackberry Custom (with Z6061 Adapter above)
Securely Holds your Blackberry Custom. Mounts with included hardware to any ZTechnik Accessory Mount.
Z6064 ZTechnik Accessory Mount; Cradle for Blackberry Pearl (with Z6061 Adapter above)
Securely Holds your Blackberry Pearl. Mounts with included hardware to any ZTechnik Accessory Mount.
Z6065 ZTechnik Accessory Mount; Cradle for Blackberry Bold (with Z6061 Adapter above)
Securely Holds your Blackberry Bold Mounts with included hardware to any ZTechnik Accessory Mount.
$19
Z6067 ZTechnik water resistant GPS case for ZTechnik Accessory Mounts
Finally, an easy way to keep your GPS secure and dry on your motorcycle! Until now, unless your GPS was designed for motorcycle use, it was almost impossible to keep your GPS safe while also being clearly visible and within easy reach. The clear front cover allows you to use the touchscreen and to clearly see the screen. Multiple foam inserts adapt to GPS units of varying thickness.
Holds any GPS up to 3.4 in. x 5.3 in. x 1.7 in. Water Resistant entry point for power and other cables. Mounts with included Two-Pin Adaptor to any ZTechnik Round or Rectangular Top Plate.
Z6068 ZTechnik water resistant Mobile Phone case for ZTechnik Accessory Mounts
Holds any Mobile Phone or other device up to 3.0 in. x 4.7 in. x 1.0 in. Water Resistant entry point for power and other cables. Mounts with included Two-Pin Adaptor to any ZTechnik Round or Rectangular Top Plate.
$29
Z6402 Satellite Radio Antenna Mount
Pre-drilled to mount onto any standard TechMount top plate or Z6202 Quick Change Adapter Plate. This bracket provides a secure and compact place to attach your XM radio antenna.
$18
Z6403 Garmin® XM Antenna Mount
Makes mounting the Garmin XM radio antenna simple. This powder coated steel bracket mounts between the GPS cradle and the Techmount top plate.
$18
Z6202 ZTechnik Quick Change Adapter Plate
The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.
Platform: 3.125 in. x 2.50 in.
$18
Z6208 Small Cell Phone/MP3 Holder
Adjustable cradle for mounting small cell phone or I-Pod® ( Nano, Mini or standard). This kit may be mounted directly to any standard top plate or to the Z6202 Quick Change Adapter.
Holds accessories from 40mm to 73mm. Overall height is 89mm
$29
Carbon Fiber Trim
If you like the look of carbon fiber, ZTechnik's decorative panels won't disappoint you. Genuine carbon fiber cloth comes alive under a crystal clear, poured resin topcoat. A pressure sensitive, die-cut adhesive backing is applied to each piece that safely but securely attaches the carbon fiber to your bike. And ZTechnik's close attention to precision fit will ensure pleasing and professional results. ZTechnik Carbon Fiber Accents are available for almost every late model BMW motorcycle. Different accent pieces include tank protectors, fuel cap trim, and gauge panels -- each specifically designed for your particular bike.
Z8890 Carbon fiber fuel cap trim - $59
Z8500 Carbon fiber tank protector - $65
$119 for the set
