Machined Aluminum ZCaps: Clutch Resevoir

Replace the plain plastic reservoir covers with these beautifully machined aluminum replacement caps. They have a beadblasted, durable hard-anodized grey finish to match the Boxer's cylinder head covers. Precise tolerances ensure a perfect and exact fit.

Anti-rotational threads hold our ZCaps more securely than other aftermarket replacement caps, aligning and gripping the OEM reservoir's locking detents.

Complete the look with our ZTechnik Machined Aluminum ZPlugs!

Machined aluminum with beadblasted finish and hard-anodized grey color.

$69

Purchase with the z5351 for  $144

---

Z5351  Machined Aluminum ZCaps: Brake Resevoir

Replace the plain plastic reservoir covers with these beautifully machined aluminum replacement caps. They have a beadblasted, durable hard-anodized grey finish to match the Boxer's cylinder head covers. Precise tolerances ensure a perfect and exact fit.

Anti-rotational threads hold our ZCaps more securely than other aftermarket replacement caps, aligning and gripping the OEM reservoir's locking detents.

Complete the look with our ZTechnik Machined Aluminum ZPlugs!

Machined aluminum with beadblasted finish and hard-anodized grey color.

$79

Purchase with the z5350 for  $144

Z6003  Techmount acessory mount - Control mount

ZTechnik BMW Control Accessory Mount attaches to the handlebar control pinch bolts (clutch or brake side). Standard Round Top Plate is great for mounting devices like a GPS or Satellite Radio. Top Plate is fully angle adjustable and can be rotated for easy accessibility and viewing of your device.

Application Notes: Larger devices such as a Radar Detector may require the Wide Top Plate, Z6044. Devices that have mounting cradles with the standard AMPS 4-hole pattern mount directly to the round top plate. Other devices will require an additional ZTechnik mounting cradle or adaptor plate. See Part Numbers Z6055-Z6066. Garmin® ZUMO® 660/665 or BMW® Navigator IV require ZTechnik Top Plate Z6032.

6061 T6 Aluminum and Stainless Steel
Platform: 2.25 in. (5.7cm) Round Top Plate

$95

---

Z6030  ZTechnik Quick Change Adapter Plate

The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.

Platform: 3.125 in. x 2.50 in.

$19
 

---

Z6032  ZTechnik Accessory Mount; Garmin Zumo 660/665 Top Plate

The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.

Platform: 3.125 in. x 2.50 in.

$13

---

Z6050  ZTechnik Accessory Mount; 3.0 in. (76mm) Extension Shaft

The 3.0 in. Extension Shaft provides additional mounting flexibility. Positions your devices within easier reach, or clears your tank bag or gauges.

$13

---

Z6057 GPS Holder

Adjustable Cradle for GPS units with flat back panels. Adjusts to accommodate GPS Units from 2.5 to 3.5 in. tall, 5.0 in. wide and 1.25 in. thick. Mounts to any current ZTechnik Accessory Mount with included hardware.

$29

---

Z6208 Small Cell Phone/MP3 Holder

Adjustable cradle for mounting small cell phone or I-Pod® ( Nano, Mini or standard). This kit may be mounted directly to any standard top plate or to the Z6202 Quick Change Adapter.

Holds accessories from 40mm to 73mm. Overall height is 89mm

$29

---

Z6200 (black) / Z6500 (silver) Wide Accessory Top

The Z6200 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

$18

 

 

---

Z6042 (black) / Z6041 (silver) Small GPS/XM Accessory Top Plate

Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit.

$18

---

Z6400 Single Pin Accessory Adaptor

For mounting GPS or satellite radio cradles with a single square pin onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter.

$5

 

---

Z6401 Four-Pin Accessory Adaptor

For mounting GPS or Satellite radio cradles with four square holes onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter.

$5 

 

---

Z6061 ZTechnik Accessory Mount; Adapter; 4-Hole AMPS pattern to Dual-T Pins 

Converts 4-Hole AMPS pattern on ZTechnik Accessory Mount Top Plates to Dual-T pins. Allows Dual-T mounting accessories to be mounted onto ZTechnik top plates.

$5

---

Z6062  ZTechnik Accessory Mount; Cradle for iPhone (with Z6061 Adapter above)

Securely Holds your iPhone® 3G or 3GS or Motorola® Droid®. Mounts with included hardware to any ZTechnik Accessory Mount.











6063  ZTechnik Accessory Mount; Cradle for Blackberry Custom (with Z6061 Adapter above)

Securely Holds your Blackberry Custom. Mounts with included hardware to any ZTechnik Accessory Mount.










6064  ZTechnik Accessory Mount; Cradle for Blackberry Pearl (with Z6061 Adapter above)

Securely Holds your Blackberry Pearl. Mounts with included hardware to any ZTechnik Accessory Mount.









6065  ZTechnik Accessory Mount; Cradle for Blackberry Bold (with Z6061 Adapter above)

Securely Holds your Blackberry Bold Mounts with included hardware to any ZTechnik Accessory Mount.

$19

---

Z6067  ZTechnik water resistant GPS case for ZTechnik Accessory Mounts

Finally, an easy way to keep your GPS secure and dry on your motorcycle! Until now, unless your GPS was designed for motorcycle use, it was almost impossible to keep your GPS safe while also being clearly visible and within easy reach. The clear front cover allows you to use the touchscreen and to clearly see the screen. Multiple foam inserts adapt to GPS units of varying thickness.

Holds any GPS up to 3.4 in. x 5.3 in. x 1.7 in. Water Resistant entry point for power and other cables. Mounts with included Two-Pin Adaptor to any ZTechnik Round or Rectangular Top Plate.

Z6068  ZTechnik water resistant Mobile Phone case for ZTechnik Accessory Mounts

Holds any Mobile Phone or other device up to 3.0 in. x 4.7 in. x 1.0 in. Water Resistant entry point for power and other cables. Mounts with included Two-Pin Adaptor to any ZTechnik Round or Rectangular Top Plate.

$29 

 

---

Z6403  Garmin® XM Antenna Mount

Makes mounting the Garmin XM radio antenna simple. This powder coated steel bracket mounts between the GPS cradle and the Techmount top plate.

$18